ELG Carbon Fibre’s new nonwoven line manufactures market’s first 2.7m wide recycled carbon mats

News

15th September 2016

ELG Carbon Fibre’s new nonwoven line manufactures market’s first 2.7m wide recycled carbon mats

ELG Carbon Fibre believes the materials will strongly appeal to OEM’s in the transportation sector seeking cost effective alternatives to virgin carbon fibre for vehicle lightweighting.

The ELG nonwoven machine
The new machine has been custom built to ELG Carbon Fibre’s exacting specifications. Designed and manufactured in the UK, it can produce a variety of nonwoven materials including 100% recycled carbon fibre mats and thermoplastic blends such as carbon fibre mixed with PP, PA, PPS fibres.

Extensive reconfiguration of the standard nonwoven manufacturing process was required to ensure the equipment could accept and process recycled carbon fibres. Special adaptations were made to limit fibre loss, breakage and cleaning cycles.

The machine is also unique in being able to use reclaimed carbon fibres that have been obtained through pyrolysis of scrap prepreg materials or cured laminates, providing important feedstock flexibility versus existing equipment available in the marketplace which can only accept dry manufacturing waste.

The equipment features a flexible, modular based design that allows easy extension of its initial capacity of 250mt/pa to a maximum output of 1000mt/pa within 9-12 months as customer demand increases. It can produce webs ranging from 100gsm-500gsm at widths up to 2.7 metres and, depending on the final mat thickness, roll lengths will range from 30-50 metres.

Development programme
Before building the new machine, a two year project was undertaken by ELG Carbon Fibre’s R&D department. The essential test elements were conducted in-house on lab equipment that was reconfigured to support an initial pilot scheme and then adjusted to refine the various processes including fibre opening, feeding, web forming and consolidation of layers.

These lab evaluations provided the R& D team with the critical parameters and data used to develop the final specification for the full-scale production line.

Nonwoven applications
The Carbiso™ M and TM product ranges demonstrate excellent drapeability and performance whilst delivering cost effective light weighting and significant environmental benefits compared to virgin carbon fibre. The materials may be used either on their own or with selective use of virgin carbon fibres to provide tailored structural properties.

ELG Carbon Fibre’s Carbiso™ M mats are ideally suited for closed mould processes and can also be used for the manufacture of intermediate products such as prepregs and sheet moulding compounds for composite manufacturing. The thermoplastic Carbiso™ TM mats are designed for fast cycle times in press moulding applications.

 “With the correct design, nonwoven recycled carbon fibre can be used very successfully to manufacture low cost, lightweight structures using most high-volume manufacturing processes. It seems that new applications for these materials are being identified every week, making this an exciting and progressive time for the company and our technology”, concludes Frazer Barnes, Managing Director of ELG Carbon Fibre.

A sample of the 2.7 metre Carbiso™ M mat will be on display at the Experience Composites Show in Augsburg, Germany from 21st – 23rd September (Hall 3, Booth 342).

Back To News